Verbinden Sie das Wechselstromkabel mit der Vorderseite des Advanced Gateway 2330 und
anschließend mit einer Steckdose. Stellen Sie sicher, dass Sie das richtige Stromkabel für den
Router und das Netzteil verwenden.
Land oder Region
Anschlussstandard
Spannung/Frequenz
Kontinentaleuropa
Stecker VII nach Standard CEE 7 220 oder 230 V AC
50 Hz
Einphasig
USA/Kanada/
Japan
Stecker NEMA5-15P
100 oder 230 V AC
50-60 Hz
Einphasig
Großbritannien
Stecker BS1363 mit Sicherung
240 V AC
50 Hz
Einphasig
Australien
Stecker AS3112-1981
240 V AC
50 Hz
Einphasig
Module des Advanced Gateway 2330
Schutz der Module des Advanced Gateway 2330
Die folgenden Vorgehensweisen verhindern Beschädigungen beim Umgang mit dem Avaya
Advanced Gateway 2330:
• Tragen Sie stets ein geerdetes antistatisches Armband, wenn Sie mit Modulen
umgehen.
• Platzieren Sie Module immer auf geeignetem antistatischem Material.
• Fassen Sie Module an der Blende und den Griffen an. Berühren Sie keine Anschlussstifte
oder elektrischen Verbindungen.
• Lassen Sie keine Steckplätze für Schnittstellen- oder Netzteilmodule leer. Verschließen
Sie alle Steckplätze mit Modulen oder Abdeckungen, um die Sicherheit und eine
ordnungsgemäße Kühlung zu gewährleisten und elektromagnetische Störungen im Fach
zu vermeiden.
• Stellen Sie sicher, dass die Umgebung die Anforderungen hinsichtlich Temperatur,
Feuchtigkeit und Sauberkeit erfüllt.
• Ziehen Sie Flügelschrauben oder Bügelmuttern nicht zu fest an. Drehen Sie Schrauben
und Muttern, bis sie sich nicht mehr bewegen, plus eine Viertel Umdrehung. Wenn Sie
Module des Advanced Gateway 2330
Regulatory Information
August 2013 35