OCS-only configuration example
The following procedure shows the IP address configuration required for the above setup in
the AG2330.
Procedure steps
1. Enter configuration mode:
configure terminal
2. Configure the AG2330 Ethernet interface to connect with the existing network:
interface ethernet 0/1
ip address 47.80.235.163 255.255.255.0
exit ethernet
3. Configure the OCS Mediation Server IP as the next-hop SIP server for the Media
Gateway, as well as the SIP transport protocol.
sip-ua
sip-server ipv4:47.80.235.164:5060
transport tcp
exit
4. Specify the IP address of the bound Media Gateway interface.
voice service voip
sip
bind all ipv4:47.80.235.163
exit 2
AG2330 configuration example with OCS and CS 1000
In this scenario, the OCS 2007 Server and the Avaya CS 1000 are running in the head office
and the Mediation Server is running in the branch office together with the AG2330. The Media
Gateway running in the AG2330 continues to act as a trunking gateway to route calls from
OCS Clients and Avaya IP Phones to PSTN networks.
The following figure shows a typical deployment of this scenario. Here OCS clients running in
the remote branch office register themselves with the OCS Server and Avaya IP phones
register with the CS 1000 at the head office.
Configuring the AG2330 for OCS deployment
54 Avaya AG2330/SR2330/SR4134 Quick Start Guide
August 2013