Prerequisites
• Ensure that the Mediation Server module is properly inserted into one of the medium slots
of the SR4134 and has been properly detected by the router. Use the
show chassis
command to ensure that the module status displays in NORMAL mode.
• Ensure that the Windows Server OS software on the Mediation Server module has booted
successfully and that you can log on to Windows Server OS software using the Windows
administrator logon information.
• Ensure that the Mediation Server running on the module has been successfully added to
the domain of the OCS network in which it is configured.
• Ensure that the Mediation Server running on the module has been successfully activated
with the OCS network in which it is configured.
For details on how to execute the last two steps, see
Microsoft Office Communications Server
2007 Enterprise Voice Planning and Deployment Guide
or
Microsoft Office Communications
Server 2007 R2 Enterprise Voice Deployment Guide
.
Mediation Server module configuration procedures
The following task flow shows you the sequence of procedures you perform to configure the
Mediation Server module. To link to the referenced procedures, see
on page 25.
Mediation Server module configuration for SR4134
24 Avaya AG2330/SR2330/SR4134 Quick Start Guide
August 2013