5. To add a flow for Avaya Equinox
®
Management, do the following:
a. Navigate to
Device Specific Settings
>
End Point Flows
>
Server Flows
and then
select
Add
.
b. In
Flow Name
, provide a name for the flow.
For example:
EqMngFlow
.
c. From
Server Configuration
, select the Avaya Equinox
®
Management configuration
that you created in step 3.
d. From
Received Interface
, select the internal A1 interface.
e. From
Signaling Interface
, select the internal A1 interface.
f. From
Media Interface
, select the internal A1 interface.
g. From
End Point Policy Group
, select
required
.
6. To add a flow for the Avaya Aura
®
Web Gateway, do the following:
a. Navigate to
Device Specific Settings
>
End Point Flows
>
Server Flows
and then
select
Add
.
b. In
Flow Name
, provide a name for the flow.
For example:
AAWGFlow
.
c. From
Server Configuration
, select the Avaya Aura
®
Web Gateway configuration that
you created in step 4.
d. From
Received Interface
, select the internal A1 interface.
e. From
Signaling Interface
, select the internal A1 interface.
f. From
Media Interface
, select the external B1 interface.
g. From
End Point Policy Group
, select
required
.
Certificate setup
The following sections describe how to configure certificates.
Creating a certificate signing request on Avaya Session Border
Controller for Enterprise
Procedure
1. Log in to the Avaya SBCE web administration interface.
2. Navigate to
TLS Management
>
Certificates
.
Certificate setup
October 2018
Deploying the Avaya Aura
®
Web Gateway
135
