e. To save the changes on the system, select
Apply
and then select
Continue
.
f. Select
Return to Main Menu
and press
Enter
.
4. In the
Cassandra Encryption
menu, enable SSL encryption to secure Cassandra
database communications between nodes in a cluster.
Important:
If you want to enable Cassandra internode encryption, you must do so during the initial
installation. This setting cannot be changed after the initial installation.
5. Select
Front-end host, System Manager and Certificate Configuration
and do the
following:
a. Select
System Manager FQDN
and enter the FQDN of the Avaya Aura
®
System
Manager that signs the certificates for Avaya Aura
®
Web Gateway services.
b.
(Optional)
Select
System Manager web admin username (o)
and
System
Manager web admin password
and provide the credentials.
c. Select
System Manager HTTPS Port
and type the port for contacting Avaya Aura
®
System Manager.
The default port is 443.
d. Select
System Manager Enrollment Password
and type the Avaya Aura
®
System
Manager enrollment password.
e. Select
Keystore password
and type a password for using the local keystore.
The keystore password on additional nodes should match the keystore password for
the initial node.
Important:
You must remember the keystore password for future reference. You need this
password for other certificate management tasks.
f. Configure additional settings that are required for your system as described in
end host, System Manager, and certificate configuration
on page 73.
To return to the previous menu, select
Return to Main Menu
and press
Enter
.
6. Select
Deployment settings
and then press the
Spacebar
to select the deployment
option that corresponds to the solution that you are installing.
You must configure the same deployment type that you configured on the initial node.
If you have conferencing in your solution, then select
Team Enga Conferencing
.
Otherwise, you must select
Team Engagement
. Do not select
Conferencing only
.
7. To review the settings, select
Continue
and then select
Accept and continue
.
The system runs pre-install configuration checks.
8. To install the software, select
Continue
and then accept the license agreement.
Wait for several minutes while the installation proceeds.
Avaya Aura
®
Web Gateway setup
October 2018
Deploying the Avaya Aura
®
Web Gateway
70
