Component replacement
S8300 and G700 component maintenance
Maintenance Procedures
295
December 2003
h
Select the FTP Backup Method and enter the customer-supplied information for:
— User Name
— Password
— Host Name
— Directory
i
Click the Start Backup button.
j
If IA770 is installed on the S8300, back up AUDIX announcements:
— Return to the Backup Now screen and uncheck all but Audix Announcements
— Select the FTP Backup Method and enter the login destination information as in
Step 3-c.
— Click the Start Backup button.
4
Install the new hard drive or S8300 Media Server.
CAUTION:
Be sure to wear a properly grounded ESD wrist strap when handling the S8300 Media
Server, hard drive, and the (optional) CWY1. Place all components on a grounded, static-
free surface when working on them. When picking up the hard drive, be sure to hold it
only on the edges — do not touch the bottom of the hard drive.
a
Shutdown the S8300 Media Server using either the Web interface or the manual Shutdown
button on the S8300 faceplate.
— On the Maintenance Web Interface, select Shutdown this Server under the
“Server” heading. Select the Delayed option, leave the “After Shutdown, Restart
System” unchecked, and click Shutdown.
— Alternatively, you can manually initiate a shutdown by pressing the Shutdown
button on the S8300 faceplate. Hold the button in until the green “OK to Remove”
LED starts blinking.
In either case, when the “OK to Remove” LED goes on steady, you can power-
down the G700. If the LED does not go on steady within 5 minutes, proceed to the
power-down step.
b
Power-down the G700 by unplugging the power cord.
c
Loosen the two thumb screws on the S8300.
NOTE:
When removing or inserting the S8300 circuit pack, the LED module (above slot V1) must
also be removed or inserted together with the S8300.
d
Disengage the LED module and the S8300 circuit pack and remove them together from
the G700.
NOTE:
If you are replacing only the hard drive (and keeping the S8300 circuit pack), continue
with
. If you are replacing the entire S8300 Media Server (including its hard drive),
Summary of Contents for CMC1
Page 1: ...Maintenance Procedures 555 245 103 Issue 1 1 December 2003 ...
Page 14: ...Contents 14 Maintenance Procedures December 2003 ...
Page 416: ...Additional maintenance procedures IP Telephones 416 Maintenance Procedures December 2003 ...
Page 426: ...Index X 426 Maintenance Procedures December 2003 ...
