INDeX Integration - Page 47
DECT - Installation Manual
Page 47
38HBKD0001SAH – Issue 14 (27th October 2003)
Overview
INDeX Integration
Overview
The DECT system can be used with most PBX's that provide analogue
extension connections. However, when used with the INDeX PBX, the
DECT system is able to access a range of additional features.
–
Mobile Twin Numbers:
Allows DECT handsets to be associated with switch terminals for
parallel ringing and diverts.
–
DECT Integration:
Allows 20DT handsets to display CLI/alpha tagging information from
the INDeX PBX and to access the INDeX's directory of system speed
dials/extensions.
Mobile Twin Numbers
INDeX Level 7.2+ provides a
Mobile Twin Number
option. This option
allows the directory number of a DECT handset to be associated with the
directory number of another terminal (e.g. a fixed desk telephone).
The use of
Mobile Twin Number
requires entry of a
Mobile numbers
switch licence on the INDeX.
When used, having a mobile twin number has the following effects:
– Calls to the fixed terminal also cause the DECT handset to ring.
– If either the fixed terminal or DECT handset are busy callers receive
busy tone (or follow the fixed terminal's divert on busy if set).
To enable mobile number use:
1. From
the
Main Menu
select
System
and then
Switch Licences
.
2. Select
Mobile numbers
and enter the licence key.
To associate a DECT handset with a fixed terminal:
1. From
the
Main Menu
select
Terminal
(Level 7.2+)
or
User
(Level
8.0+)
and enter the directory number of the fixed extension.
2. Select
Extended functions
.
3. Select
Mobile twin number
and enter the directory number of the
DECT handset (this automatically sets the
Mobile twin number
setting of the DECT extension to the fixed terminals directory number).
