IP Office Integration - Page 51
DECT - Installation Manual
Page 51
38HBKD0001SAH – Issue 14 (27th October 2003)
DECT Configuration Software
DECT Configuration Software
With the Site Survey performed (
and all DECT handsets Registered (
Configuration software can be installed.
Software Installation
The DECT Configuration software is installed from the IP Office
Administration CD and can be installed onto any Windows 95 or higher
PC. Perform the following:
1. On the PC running on the same TCP/IP LAN as the IP Office, connect
the DECT to the PC using the DCU to PC Programming Cable (see
page 69) and leave this connected.
2. Insert the IP Office Administration CD and follow the installation
Wizard
instructions.
3. In
the
Select Components
menu, select (tick box)
DECT Configuration.
4. When installation is completed, click
Finish.
Licence
To install the DECT licence, perform the following:
1. From Programs/IP Office, open the
Manager
application. The default
password for Administrator is
Administrator
, however this
must
be
changed as early as possible.
2. Open the Configuration Tree (File/Open). The default password for the
configuration is
password
, however this
must
changed as early as
possible.
3. Click on the
Licence
icon and in the right hand field, right click and
select new.
4. Enter a valid Licence string for the DECT (obtained from your
supplier). The DECT Configuration Licences are for 8, 16 or 64
extensions.