Configuration Note 9109
– Version A (7/03)
A V A Y A I n t u i t y
A U D I X M e s s a g e
S e r v e r
Avaya Definity G3 / ProLogix
(in-band / mode code)
Analog
Interface Card
LINE
TRUNK
TDM
BUS
CPU
IVC6
Lucent Definity G3 / Prologix
Intuity Audix
XXX
Minimum Software
Release 4.3
Minimum Software
G3V6.1
Call ID
Multiple Return to Operator
Message Waiting On/Off
Automated Attendant
Outcalling
VOICE PATH
1.0 METHOD OF INTEGRATION
With inband integration, one pathway between the PBX and the Intuity
™
transmits both call information and voice communications. The pathway is
provided by 2-wire analog single-line circuits that connect to IVC6 Cards
in the Intuity system. The IVC6 simulates 2-wire analog lines. Calls to an
Intuity port are preceded by the called party information from the PBX in
DTMF format. The Intuity answers and plays the appropriate greeting.
Message-waiting indication is set and canceled using DTMF commands
over the same pathway.
With inband integration, one
pathway between the PBX and
Intuity system transmits both
call information and voice
communications
2.0 AVAYA INTUITY ORDERING INFORMATION
•
Tip/Ring Voice Port Cards (IVC6), six analog connections per card
Avaya Intuity Requirements
•
Serial and Inband Integration Software (FID 12 or higher)
•
INTUITY Software Release 5.0 or higher
3.0 PBX HARDWARE REQUIREMENTS
•
TN742 or TN746B Analog ports, one per Intuity port
PBX hardware requirements
3.1 PBX SOFTWARE REQUIREMENTS
•
Minimum Software: G3 V 6.1
Disclaimer: Configuration Notes are designed to be a general guide reflecting AVAYA Inc.’s experience configuring its systems.
These notes cannot anticipate every configuration possibility given the inherent variations in all hardware and software products.
Please understand that you may experience a problem not detailed in a Configuration Note. If so, please notify the TAC/TSO at
(408) 922-1822 and if appropriate we will include it in our next revision. AVAYA Inc. accepts no responsibility for errors or
omissions contained herein.
