AVAYA E1/QSIG
23
Next access the
Port Groups
tab under the MAS name
1. Click
Add Group
button
NOTE
: The MWI port within
the MWI Port Group it’s used
by the MWI sub-system to
control concurrent MWI
requests. This does not
affect incoming/outgoing
traffic to the port in anyway.
2. Name Group
MWI
3. Within the new
MWI
Port Group uncheck all
Ports
except the MWI
port.
This will be the upper most port of the trunk group. Port 29
on a single board or Port 59 if 2 boards (see side NOTE). This port
can receive calls, so ensure it is programmed for both
Incoming
and
Outgoing
under the
Port Group Usage
4. Return to the
Port Groups
General tab and ensure the
Default
Group
under
Port Groups
is configured to meet the customer’s
need for
Incoming
and
Outgoing
under
Port Group Usage
.
The above information is provided by AVAYA Inc. as a guide. See disclaimer on page 1
