Avaya Definity G3, Configuration Note

AVAYA  E1/QSIG

4

5.0 CONFIGURING THE PBX TO INTEGRATE 

The following programming is intended for certified PBX technicians/engineers.  
The screens shown in this section are taken from an Avaya PBX administration 
terminal.  Some parameters may not appear on all software releases. 

Ensure all required software features are enabled on the PBX.  Access the System 
Parameters Customer Options form.  Below is an example of the forms required for 
QSIG integration, with the required features in 

boldface

. 

IMPORTANT:

Only change the recommended fields. (see note on left)

display system-parameters customer-options                   Page   2 of   9 
                                OPTIONAL FEATURES 
 
    Abbreviated Dialing Enhanced List? y              Attendant Vectoring? y 
        Access Security Gateway (ASG)? n          Audible Message Waiting? y 
        Analog Trunk Incoming Call ID? y              Authorization Codes? y 
 A/D Grp/Sys List Dialing Start at 01? n                       CAS Branch? n 
Answer Supervision by Call Classifier? y                         CAS Main? n 
                                  ARS? y                Change COR by FAC? n 
                 ARS/AAR Partitioning? y  

Cvg Of Calls Redirected Off-net? y**

          ARS/AAR Dialing without FAC? n                      

DCS (Basic)? y*

                       ASAI Interface? y               

DCS Call Coverage?

y*

       ASAI Proprietary Adjunct Links? y               

DCS with Rerouting?

y*

       Async. Transfer Mode (ATM) PNC? n           DEFINITY Network Admin? n 
  Async. Transfer Mode (ATM) Trunking? n   Digital Loss Plan Modification? n 
              ATM WAN Spare Processor? n                          DS1 MSP? y 
                                 ATMS? y            DS1 Echo Cancellation? y 

display system-parameters customer-options                    Page   3 of   9 
                                OPTIONAL FEATURES 
 
   Emergency Access to Attendant? y                          ISDN-BRI Trunks? n 
                  Enhanced EC500? y                                 I

SDN-PRI?

y

          Extended Cvg/Fwd Admin? y                     Malicious Call Trace? y 
     External Device Alarm Admin? n     Mode Code for Centralized Voice Mail? n 
                Flexible Billing? n 
   Forced Entry of Account Codes? n                 Multifrequency Signaling? y 
      Global Call Classification? n Multimedia Appl. Server Interface (MASI)? n 
             Hospitality (Basic)? y         Multimedia Call Handling (Basic)? y 
 Hospitality (G3V3 Enhancements)? n      Multimedia Call Handling (Enhanced)? y 
                    H.323 Trunks? y                       Multiple Locations? n 
                                               Personal Station Access (PSA)? n 
                     IP Stations? y 
   

ISDN Network Call Redirection? n 

            ISDN Feature Plus? y 

NOTICE: 

The screens in this 

Config Note are only for 

illustration purposes.  

It is recommended that 

a qualified technician 

review the customer’s 

CM QSig programming 

for accuracy. 

*

NOTE: 

DCS is only required for 

networking.  

Stand-alone/single PBX do 

not require DCS, so those 
options may be set to “N”

**

NOTE

:  

C

vg of 

C

alls 

R

edirected 

O

ff-

N

et (

CCRON

) must be set to 

“y” if you are using 

Find Me

. 

The above information is provided by AVAYA Inc. as a guide.  See disclaimer on page 1