AVAYA E1/QSIG
5
display system-parameters customer-options Page 4 of 9
OPTIONAL FEATURES
PNC Duplication? n Tenant Partitioning? y
Terminal Trans. Init. (TTI)? y
Processor and System MSP? y Time of Day Routing? y
Private Networking? y
Uniform Dialing Plan? y
Usage Allocation Enhancements? y
R9.5 Capabilities? y VAL Full 1-Hour Capacity? y
Remote Office? y
Restrict Call Forward Off Net? y Wideband Switching? y
Secondary Data Module? y Wireless? y
Station and Trunk MSP? y
Station as Virtual Extension? y
(NOTE: You must logoff & login to effect the permission changes.)
The above information is provided by AVAYA Inc. as a guide. See disclaimer on page 1
*
Note
:
This parameter would be set to “y” if you are using DCS to network Avaya PBXs.
display system-parameters customer-options Page 7 of 9
QSIG OPTIONAL FEATURES
Basic Call Setup?
y
Basic Supplementary Services?
y
Centralized Attendant? y
I
nterworking with DCS?
n*
Supplementary Services with Rerouting?
y
Transfer into QSIG Voice Mail? y
Value-Added (VALU)? y
Define the QSIG TSC Extension and MWI Number of Digits per Voice Mail Subscriber.
The following is an example of the form, with the required features in
boldface
.
change system-parameters features Page 7 of 12
FEATURE-RELATED SYSTEM PARAMETERS
ISDN PARAMETERS
Send Non-ISDN Trunk Group Name as Connected Name? n
Display Connected Name/Number for ISDN DCS Calls? y
Send ISDN Trunk Group Name on Tandem Calls? n
Send Custom Messages Through QSIG? y
QSIG TSC Extension: 2998
MWI - Number of Digits Per Voice Mail Subscriber: 4
(*see note below)
Feature Plus Ext:
National CPN Prefix:
International CPN Prefix:
Pass Prefixed CPN to ASAI? n
Unknown Numbers Considered Internal for AUDIX? n
USNI Calling Name for Outgoing Calls? y
Path Replacement with Measurements? y
QSIG Path Replacement Extension:
2798
(vacant extension)
Path Replace While in Queue/Vectoring? n
NOTE
: This parameter must match the number of digits used for
mailbox/extension length. For
multiple length extensions
leave this field blank.
Important: The option to leave this field blank requires Avaya CM 2.1 and later.