Discard routes
About this task
Discard route enables you to prevent forwarding traffic to specific networks. You can configure
a static route that drops all packets destined to the route. This is called a discard route,
indicated by the null0 parameter.
Procedure
Use the
ip route
<network><mask>
null0
CLI command.
Note:
You cannot configure tracking on a discard route.
Example
For example, the command
ip route 134.66.0.0 16 Null0
configures the network
134.66.0.0 16 as a discard route
Summary of routing table commands
For more information about these commands, see the
Avaya Branch Gateways G250 and
G350 CLI Reference
.
For more information about these commands, see the
Avaya Branch Gateway G430 CLI
Reference
.
Command
Description
clear ip route
Delete all the dynamic routing entries from the routing table
ip default-
gateway
Define a default gateway for the router
no ip default-
gateway
Removes a default gateway for the router
ip netmask-format
Specify the format of subnet masks in the output of
show
commands
ip redirects
Enable the sending of redirect messages on the current
interface
no ip redirects
Disable the sending of redirect messages on the current
interface
ip route
Establish a static route
The router
Administering Avaya G430 Branch Gateway
October 2013 433
Summary of Contents for G430
Page 1: ...Administering Avaya G430 Branch Gateway Release 6 3 03 603228 Issue 5 October 2013 ...
Page 12: ...12 Administering Avaya G430 Branch Gateway October 2013 ...
Page 246: ...VoIP QoS 246 Administering Avaya G430 Branch Gateway October 2013 Comments infodev avaya com ...
Page 556: ...IPSec VPN 556 Administering Avaya G430 Branch Gateway October 2013 Comments infodev avaya com ...