SLS survivability
Issue 1 January 2008
1033
Parameters
You can create a trunk group that does not have any assigned members. Once a valid port is
assigned as a trunk group member, this trunk group becomes active and may be employed by
SLS call processing for incoming/outgoing trunk operation. The slot-configuration table will be
used together with the port capacity for the given module to determine the validity of a port
assignment at administration time.
As a corollary to this, there may not be more active trunk groups than there are physical trunk
members within a given gateway. Secondly, a combo-port may only be used for one active
assignment. For example, the analog station/DID trunk ports may be either allocated to serve as
an analog station or as an analog DID trunk, but not BOTH.
The maximum limits for a given trunk type are defined by the slot-configuration assignment for
the G450. The maximum number of ports allowed per interface module is defined in
for the G450.
Parameter
Description
Possible Values
Default
Value
tgnum
The required trunk group number
1-2000
group-type
The trunk group type. This
argument is required to enter the
trunk-group context.
See the following for capacities by
group type:
●
G450:
loop-start
(analog)
did
(analog)
ground-start
(analog)
bri
(ISDN basic rate)
t1isdn
(ISDN primary rate
on 1.544 Mbps facility)
e1isdn
(ISDN primary rate
on 2.048 Mbps facility)
t1inband
(non-ISDN rate
on 1.544 Mbps facility)
e1inband
(non-ISDN rate
on 2.048 Mbps facility)
Table 113: G450 SLS group type assignments
Group type
Media module
Number of
ports/channels
Description of trunks that may be
assigned
loop-start
ground-start
did
MM711
Ports 1-8
1 of 2
Summary of Contents for G450 Manager
