Roadmap
110 Avaya G450 CLI Reference
PPPoE (PPP over Ethernet)
Set the maximum time to wait for a response
during PPP negotiation
Display interface configuration and statistics
for a particular interface or all interfaces
Table 69: PPP encapsulation CLI commands (continued)
Root level command
First level command
Description
2 of 2
Table 70: PPPoE CLI commands
Root level command
First level command
Description
Enter the context of the FastEthernet
interface
Change the encapsulation to PPPoE
Configure an IP address and subnet mask for
the interface
Obtain an IP address via PPP/IPCP
negotiation
Bind interface status to an object tracker to
check whether the interface is up
Set the interface’s MTU to 1492 which
ensures that overall packet size for the
PPPoE interface does not exceed 1500,
which is the MTU for Ethernet
Override the device hostname for PPP CHAP
authentication
Set the CHAP password for authentication
with a remote peer
Prevent the device from authenticating with
CHAP after the device is requested by the
remote peer
1 of 2
Summary of Contents for G450 Manager
