CLI Commands
USP configuration
1170 Avaya G450 CLI Reference
Example
To manually set the bandwidth for the VLAN interface to 100 KB/s:
G450-001(if:Vlan 1)# bandwidth 100
Related Commands
idle-character
Use the
idle-character
command to set the bit pattern used to indicate an idle line. Use the
no
form of this command to restore the default value. For E1 and USP interfaces, the default
value is
flags
. For T1 interfaces, the default is
marks
.
Syntax
idle-character {flags|marks}
no idle-character
Parameters
User Level
read-write
Context
interface:Serial (DS1 PPP L2, DS1 PPP L2-L3, DS1 FR L2, USP PPP L2, USP PPP L2-L3,
USP FR L2)
Example
To set the idle-character to marks:
G450-001(if:Serial 3/1)# idle-character marks
Parameter
Description
Possible
Values
Default
Value
flags
Keyword specifying that flags are
transmitted to indicate an idle line
marks
Keyword specifying that marks are
transmitted to indicate an idle line
Summary of Contents for G450 Manager
