Issue 1 January 2008
33
About this Book
Overview
The
Avaya G450 CLI Reference
describes the commands used to configure and manage the
Avaya G450 Media Gateway after it is already installed. For instructions on using these
commands to configure and manage the G450, refer to
Administration for the Avaya G450
Media Gateway
, 03-602055.
Audience
The information in this book is intended for use by Avaya technicians, provisioning specialists,
business partners, and customers.
Using this book
This book describes how to use the G450 Command Line Interface (CLI) and provides a
reference to the CLI commands. Each command description contains:
●
The command name
●
A short description of the purpose of the command
●
The following sections:
-
Syntax
- This section describes the correct syntax for the command.
-
Parameters
- This section lists and describes elements of the command syntax, such as
parameters, their definitions, and allowed values.
-
User Level
- This section shows the lowest access level for which the command is
accessible. There are three access levels: User (read-only), Configure (read-write), and
Supervisor (admin).
-
Context
- This section shows the contexts from which the command can be executed.
-
Example
- This section provides an example of the use of a command, and, where
applicable, the output display. This section does not appear if the syntax and output are
simple.
-
Output Fields
- This section describes the fields in the command output, if applicable.
Summary of Contents for G450 Manager
