E1/T1 interfaces
Issue 1 January 2008
367
loopback
Use the
loopback
command to put a T1 or E1 line into loopback mode. Use the
no
form of the
command to disable loopback mode.
Syntax
For an E1 line:
loopback {[local {line | payload}] | diag}
no loopback
For a T1 line:
loopback {[local {line | payload}] | diag | [remote {line | payload}]}
no loopback
Parameters
User Level
read-write
Context
interface:Controller
Parameter
Description
Possible
Values
Default
Value
local
Keyword indicating that the controller loop
the internal transmit signal back to the
internal receive signal
line
Keyword indicating that the controller loop
the external line signal back toward the
network without reframing the DS1 signal
payload
Keyword indicating that the controller loop
the external line signal back toward the
network and reframes the DS1 signal
diag
Keyword indicating that a loopback to the
device is in place
remote
Keyword indicating to create either a remote
payload or a remote line loopback. Only in
esf framing.
Summary of Contents for G450 Manager
