E1/T1 interfaces
Issue 1 January 2008
371
Example
To create point to point sub-interface number 17 over channel group 2 over E1/T1 controller
number 1:
G450-001(super)# interface Serial 3/1:2.17 point-to-point
Related Commands
ip address
Use the
ip address
command to assign an IP address and mask to an interface. Use the
no
form of this command to delete an IP interface.
Syntax
ip address {
ip_address mask
[
admin_state
]}|negotiated
no ip address
Parameters
User Level
read-write
Context
Interface: Console, Serial (DS1 PPP L2-L3, DS1 PPP L3, DS1 FR-SUB L2-L3, DS1 FR-SUB
L3, USP PPP L2-L3, USP PPP L3), FastEthernet (L2-L3, L3, PPP L2-L3, PPP L3), VLAN
(L2-L3, L3), USB-modem, Loopback (L2-L3, L3), Tunnel (L2-L3, L3), Dialer (L2-L3, L3)
Parameter
Description
Possible
Values
Default
Value
ip_address
The IP address assigned to the interface
mask
Mask for the associated IP subnet
admin_state
The administration status. This parameter is not
used with the Console interface.
up
,
down
up
negotiated
Keyword specifying that the interface receive
address and mask from a remote device
Summary of Contents for G450 Manager
