Roadmap
52 Avaya G450 CLI Reference
Configuration files
Set or reset the UDP port used by the CNA
test plug to listen for RTP streams sent by
other test plugs running RTP tests
Set or reset the UDP port used by the CNA
test plug to send an RTP stream to another
test plug in an RTP test
Add a scheduler’s IP address to the list of
schedulers with which the test plug can
attempt to register
Disable the CNA test plug
Configure the CNA test rate limiter
Enable or disable the CNA test plug service
on the gateway
Display CNA test plug configuration and
statistics
Table 12: CNA test plugs CLI commands (continued)
Root level command
First level command
Description
2 of 2
Table 13: Configuration files CLI commands
Command
Description
Download a G450 configuration file from an FTP server
to the Startup Configuration NVRAM
Upload the current G450 configuration to a file on an
FTP server
Upload the current G450 configuration to a file on a
SCP server
copy running-config
startup-config
Commit the current configuration, including Standard
Local Survivability (SLS) data, to NVRAM
Upload the current G450 configuration to a file on a
TFTP server
1 of 2
Summary of Contents for G450 Manager
