Avaya G450 Manager Cli Reference Manual Download

Page: 663 / 1334

Packet sniffing

Issue 1 January 2008

663

Related Commands - Policy-based routing

destination-ip

dscp (policy-based routing, packet sniffing, VPN)

Related Commands - Policy

show composite-operation

Related Commands - VPN

description (ip rule)

destination-ip

dscp (policy-based routing, packet sniffing, VPN)

tcp source-port

Use the

tcp source-port

command to define a source port with the TCP protocol for which

to apply the current rule.

Use the

form of the command to set the TCP source port to

any

. If the protocol is not TCP,

the protocol is set to TCP and the destination port is set to its default value.

Use the

not

form of the command to specify that the rule applies to all TCP ports other than the

requested ports. If the protocol is not TCP, the protocol is set to TCP and the destination port is
set to its default value

Note:

Note:

Issuing this command also sets the protocol to be TCP, if it is not already.

Syntax

[not] tcp source-port any | {{eq | lt | gt} {

port_name

port_number

}}

| {range

start_port end_port

}

no tcp source-port

Summary of Contents for G450 Manager























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for G450 Manager

Reviews:

Related manuals for G450 Manager

Brands by name

Popular brands

Avaya G450 Manager, Cli Reference Manual

Search results

Summary of Contents for G450 Manager

Reviews:

Related manuals for G450 Manager

Brands by name

Popular brands