Issue 1 January 2008
67
Ethernet port configuration
Display controller statistics from a peer station
Display the current mode of the controller
Table 31: E1/T1 port configuration CLI commands (continued)
Root level command
First level command
Description
2 of 2
Table 32: Ethernet port configuration CLI commands
Command
Description
set port
auto-negotiation-flowcontrol-
advertisement
Set the flowcontrol advertisement for the specified
Gigabit Ethernet ports when performing
auto-negotiation
Configure the duplex type (full or half duplex) of an
Ethernet or FastEthernet port or range of ports
Determine whether the port is an edge port, for the
purposes of Rapid Spanning Tree Protocol (RSTP)
Enable or disable a port or a range of ports
Set the send/receive mode for flowcontrol frames
(IEEE 802.3x or proprietary) for a full duplex port
Set the default packet priority level for untagged
packets
Configure a name for a port
Enable or disable auto-negotiation on the port
set port point-to-point admin
status
Set the connection type of the port:
force-true
,
force-false
, or
auto
Set the speed of a port or range of ports
show port
auto-negotiation-flowcontrol-
advertisement
Display the flowcontrol advertisement for a Gigabit
port used to perform auto-negotiation
1 of 2
Summary of Contents for G450 Manager
