CLI Commands
Policy-based routing
782 Avaya G450 CLI Reference
Related Commands - Policy
,
,
Related Commands - VPN
,
tcp destination-port
Use the
tcp destination-port
command to define a destination port with the TCP protocol
for which to apply the current rule.
Use the
no
form of the command to set the TCP destination port to
any
. If the protocol is not
TCP, the protocol is set to TCP and the source port is set to its default value.
Use the
not
form of the command to specify that the rule applies to all TCP ports other than the
requested ports. If the protocol is not TCP, the protocol is set to TCP and the source port is set
to its default value
Note:
Note:
Issuing this command also sets the protocol to be TCP, if it is not already.
Syntax
[not] tcp destination-port any | {{eq | lt | gt}
{
port_name
|
port_number
}} | {range
start_port end_port
}
no tcp destination-port
Parameters
Parameter
Description
Possible
Values
Default
Value
any
Keyword that specifies to apply the
rule to a port with any name or
number
eq
Keyword that specifies to apply the
rule to a port whose name or
number matches exactly to the
specified name or number
Summary of Contents for G450 Manager
