PPPoE (PPP over Ethernet)
Issue 1 January 2008
821
Context
interface:FastEthernet (PPP L2-L3), Dialer (L2-L3)
Example
To enable obtaining an IP address via PPP/IPCP negotiation:
G450-001(config-if:FastEthernet 10/2)# ip address negotiated
Related Commands
mtu
Use the
mtu
command to set the current interface’s Maximum Transmission Unit (MTU). Use
the
no
form of this command to restore the interface’s MTU to its default value.
Note:
Note:
The
size_in_bytes
parameter specifies the Layer 3 packet size. Layer 2
headers are added to the packet afterwards. The Layer 2 headers vary in size,
depending on the type of interface. Thus the total size of the MTU is the sum of
the
size_in_bytes
value and the Layer 2 headers.
Syntax
[no] mtu
size_in_bytes
Parameters
User Level
read-write
Context
interface:Serial (DS1 PPP L2-L3, DS1 PPP L2, DS1 FR L2, USP FR L2, USP PPP L2,
USP PPP L2-L3), FastEthernet (L2, L2-L3), Dialer (L2, L2-L3)
Parameter
Description
Possible
Values
Default
Value
size_in_
bytes
The Maximum Transmission Unit in bytes
64-1500
1500
Summary of Contents for G450 Manager
