CLI Commands
SLS survivability
1028 Avaya G450 CLI Reference
Example
To enable SLS to recognize the switchhook flash signal and to provide subsequent transfer
service:
G450-001 (sls-station <extension>)# set swhook-flash yes
Related Commands
,
,
,
set trunk-destination
Use the
set trunk-destination
command to administer a station extension to be included
in a pool of stations that can receive incoming analog loop-start trunk calls in circular queueing
in SLS.
Note:
Note:
This command does not apply to analog DID trunks.
Syntax
set trunk-destination {yes | no}
Parameters
User Level
read-write
Context
>
Parameter
Description
Possible
Values
Default
Value
yes
Keyword indicating that this extension can
receive incoming analog loop-start trunk calls
as part of the station pool which is available in
a circular queueing fashion across the first
available idle station.
This is the default.
no
Keyword indicating that this extension cannot
receive incoming analog loop-start trunk calls
as part of the station pool which is available
Summary of Contents for G450 Manager
