SLS survivability
Issue 1 January 2008
1059
Related Commands
,
,
,
,
set supervision
Use the
set supervision
command to define the incoming signaling supervision mode for
analog DID trunks or DS1 tie trunks only in SLS.
Syntax
set supervision
sup-type
Parameters
User Level
read-write
Context
>
Parameter
Description
Possible Values
Default
Value
sup-type
For analog-did group types:
The incoming signaling supervision
mode for analog DID trunks
immediate
wink
wink
For t1inband and e1inband group
types:
Signaling supervision for the
non-ISDN digital trunks
*
* For TIE trunks you must specify both the incoming and outgoing modes. For example,
wink-immediate
requires the DS1 interface to use wink supervision to answer an incoming call and use an immediate
seizure protocol for outbound calls.
loop-start
ground-start
wink-wink
wink-immediate
wink-auto
immediate-immediate
auto-auto
auto-wink
wink-wink
Summary of Contents for G450 Manager
