SNMP access configuration
Issue 1 January 2008
1083
User Level
admin
Context
general
Example
To create or configure a remote SNMPv3 user, with username john, associated with group
L2Group, and accessing engine
00:02:00:81:00:d0:00:4c:18:00
:
G450-001(super)# snmp-server remote-user john 00:02:00:81:00:d0:00:4c:18:00
L2Group
Related Commands - SNMP access configuration
,
,
Related Commands - SNMP trap configuration
set snmp trap enable | disable auth
set snmp trap enable | disable frame-relay
,
snmp-server enable notifications
,
Related Commands - Dynamic trap manager
snmp-server dynamic-trap-manager
snmp-server user
Use the
snmp-server user
command to configure settings for an SNMPv3 user. If the user
does not exist, it is created. Use the
no
form of the command to remove the user from specific
groups. If no groups are specified, the user is removed from all groups.
Syntax
snmp-server user
username
groupname
{{v1|v2c}|{v3 [auth {md5|sha}
auth-password
[priv des56
priv-password
]]}}
no snmp-server user
username
[
groupname
{v1|v2c|v3}]]
Summary of Contents for G450 Manager
