Spanning tree
Issue 1 January 2008
1099
set port point-to-point admin status
Use the
set port point-to-point admin status
command to manage the connection
type of the port.
Syntax
set port point-to-point admin status
module/port admin_status
Parameters
User Level
read-write
Context
general
Example
To specify that the connection type of port 6/5 is automatically detected:
G450-001(super)# set port point-to-point admin status 6/5 auto
Parameter
Description
Possible Values
Default
Value
module
Number of the module
port
Number of the port on the
module.
You can also specify a range
of ports separated by a dash,
for example, 10/5-6 for both
ETH LAN ports 5-6 on the
front panel.
admin_status
The connection type of the
port
force-true
— specify
that the port is
connected
point-to-point
force-false
— specify
that this port is shared
media
auto
— try to
automatically detect
the connection type of
the port
Summary of Contents for G450 Manager
