Spanning tree
Issue 1 January 2008
1103
set port spantree priority
Use the
set port spantree priority
command to set the Spanning Tree priority level of
a port. This value defines the priority of a port to be blocked in case two ports with the same
cost cause a loop.
Syntax
set port spantree priority
module
/
port
value
Parameters
User Level
read-write
Context
general
Example
To set the priority for port 6/5 to 128:
G450-001# set port spantree priority 6/5 128
port 6/5 spantree priority is 128
Related Commands
,
set port spantree force-protocol-migration
,
Parameter
Description
Possible
Values
Default
Value
module
The module number
port
The port number
value
Number representing the priority of the
port. 0 is the highest priority. A port with a
lower priority will be blocked.
0-240
(in
multiples
of 16)
128
Summary of Contents for G450 Manager
