CLI Commands
Synchronization
1122 Avaya G450 CLI Reference
User Level
read-write
Context
general
Example
To specify that ports 1, 3, 5, 6, 7, and 8 of media module 2 are used for normal failover:
G450-001(super)# set sync interface primary v2 1,3,5-8
Related Commands
set sync source
Use the
set sync source
command to specify which clock source is the active clock source.
The identity of the current synchronization source is not stored in persistent storage.
Syntax
set sync source {primary | secondary | local}
Parameters
mmID
The Media Module ID number of a stratum
clock source, of the form “vn” where “n” is
the slot number
portID
Port or port range for an ISDN clock source
candidate
Parameter
Description
Possible
Values
Default
Value
Parameter
Description
Possible
Values
Default
Value
primary
Keyword specifying to set the primary clock
source to be active
Summary of Contents for G450 Manager
