CLI Commands
VLAN configuration
1190 Avaya G450 CLI Reference
show port vlan-binding-mode
Use the
show port-vlan-binding
command to display port VLAN binding mode
information. If no module number is specified, information for all ports on all modules is
displayed. If no port number is specified, information for all ports on the specified module is
displayed.
Syntax
show port vlan-binding-mode [
module
[/
port
]]
Parameters
User Level
read-only
Context
general
Example
To display VLAN binding information for all ports:
G450-001(super)# show port vlan-binding-mode
port 10/5 is statically bound
port 10/6 is statically bound
Related Commands
Parameter
Description
Possible
Values
Default
Value
module
The number of the module
port
The number of the port on the module. You can
also specify a range of ports, for example,
10/5-6 for both ETH LAN ports 5-6 on the front
panel.
Summary of Contents for G450 Manager
