VPN
Issue 1 January 2008
1237
User Level
read-write
Context
crypto map
Example
To specify the crypto map description as “crypto map 1”:
G450-001(config-crypto:10)# description "crypto map 1"
Related Commands
set dscp
Use the
set dscp
command to set the DSCP value in the tunneled packet. Use the
no
form of
this command to take the DSCP value from the original header (default setting).
Syntax
[no] set dscp
dscp-value
Parameters
User Level
read-write
Context
crypto map
Parameter
Description
Possible
Values
Default
Value
dscp-value
The static DSCP value in the DS field of the
tunneled packet.
The default setting is
no set dscp
, which
specifies that the DSCP is copied from the
DS field of the original packet.
0-63
Summary of Contents for G450 Manager
