CNA test plugs
Issue 1 January 2008
217
Parameters
User Level
read-write
Context
cna-testplug
Example
To set the RTP echo port to port 45230:
G450-001(cna-testplug 1)# rtp-echo-port 45230
Related Commands
clear counters (CNA test plugs)
,
,
,
,
rtp-test-port
Use the
rtp-test-port
command to set the UDP port used by the CNA test plug to send an
RTP stream to another test plug in an RTP test. Use the
no
form of the command to return to
the default UDP port for RTP tests.
Syntax
rtp-test-port
port
no rtp-test-port
Parameters
Parameter
Description
Possible
Values
Default
Value
port
The UDP port number to be used as the RTP echo
port number
1-65535
8888
Parameter
Description
Possible
Values
Default
Value
port
The UDP port number to be used as the RTP test
port
1-65535
8887
Summary of Contents for G450 Manager
