CLI Commands
CNA test plugs
218 Avaya G450 CLI Reference
User Level
read-write
Context
cna-testplug
Example
To set the RTP test port to 65120:
G450-001(cna-testplug 1)# rtp-test-port 65120
Related Commands
clear counters (CNA test plugs)
,
,
,
scheduler
Use the
scheduler
command to add a scheduler’s IP address to the list of schedulers with
which the test plug can attempt to register. You can list up to five schedulers. The test plug
attempts to register with the scheduler highest on the list, and moves along the list if necessary
until registration is successful.
You can specify the TCP registration port, the port used by the test plug to request registration
and send registration parameters to a scheduler. By default, the TCP registration port is 8888.
Use the
no
form of the command to clear one of the scheduler addresses.
Syntax
scheduler
index scheduler-address
[:
port
]
no scheduler
index
Parameters
Parameter
Description
Possible
Values
Default
Value
index
An index in the scheduler list.
Scheduler 1 is the first
scheduler attempted by the test
plug for registration.
1-5
scheduler-address
The IP address of a scheduler
port
The TCP registration port
number
1-65535
8888
Summary of Contents for G450 Manager
