E1/T1 interfaces
Issue 1 January 2008
361
channel-group
Use the
channel-group
command to create a channel group logical interface for a PPP or
Frame Relay session. Use the
no
form of the command to delete a channel group.
Note:
Note:
If you issue this command with an existing channel number, the timeslots you
specify will replace any that already exist.
Syntax
channel-group
channel_number
timeslots
ts_list
speed
speed_value
no channel-group
channel_number
Parameters
User Level
read-write
Context
interface:Controller
Example
To create a new channel group number 2, with time slots 5, 6, and 8 and speed of 56:
G450-001(super-controller:5/1)# channel-group 2 timeslots 5-6,8 speed 56
Related Commands
,
,
Parameter
Description
Possible
Values
Default
Value
channel_
number
The ID number to identify the channel
group
For T1:
0-23
For E1:
0-30
ts_list
The time slots to include in this channel
group. Values can be separated either by
a “–” for a range, or by commas for a list.
For T1:
1-24
For E1:
1-31
speed_value
The acceptable speed values
56
,
64
56
Summary of Contents for G450 Manager
