E1/T1 interfaces
Issue 1 January 2008
373
Data in current interval (802 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 802 Unavail Secs
Total Data (last 4 15 minute intervals):
10 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 1 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 3600 Unavail Secs
Related Commands - E1/T1 interfaces
,
,
,
,
Related Commands - Verifying WAN configuration
,
show controllers remote
Use the
show controllers remote
command to display controller statistics from a peer
station. If the Facility Data Link (FDL) for this controller is set to
att
, the system displays the
status (up or down) of the line. Otherwise, the system displays statistics for the controller. To set
the Facility Data Link, refer to
Syntax
show controllers remote
module/port fdl_data_type
Parameters
User Level
read-write
Parameter
Description
Possible Values
Default
Value
module
The module number
port
The port number
fdl_data_
type
The type of statistics to
display
1h-data,
errored-esf-data,
enhanced-1h,
enhanced-c1-configuration
Summary of Contents for G450 Manager
