CLI Commands
Frame relay encapsulation
414 Avaya G450 CLI Reference
Parameters
User Level
read-only
Context
general
Example
To clear the Frame Relay counters:
G450-001(super)# clear frame-relay counters
To clear a specific Frame Relay interface’s counters:
G450-001(super)# clear frame-relay counters interface “Serial 4/1.100”
Related Commands
,
frame-relay priority-dlci-group
,
,
interface serial
Use the
interface serial
command to enter Serial interface or sub interface configuration
mode. If the specified interface or sub interface does not exist, the system creates it and enters
its configuration mode.
Use the
no
form of the command to delete the interface. The
no
form can only be used to delete
sub L3 and sub frame relay interfaces. The command fails for USP interfaces and when higher
or lower layers are defined for that interface.
Syntax
[no] interface Serial
module
/
if_number
[
if_link_type
]
Parameter
Description
Possible
Values
Default
Value
interface
Keyword specifying that the counters should
be cleared on the specified interface
interface_name
The name of the interface
Summary of Contents for G450 Manager
