CLI Commands
Frame relay encapsulation
422 Avaya G450 CLI Reference
Related Commands
,
,
,
frame-relay priority-dlci-group
,
,
frame-relay lmi-type
Use the
frame-relay lmi-type
command to manually define the type of the Local
Management Interface (LMI) to use.
Use the
no
form of this command to specify automatic detection of the LMI type (auto-sensing).
If auto-sense fails, ANSI is used as the default.
Syntax
[no] frame-relay lmi-type
lmi_type
Parameters
User Level
read-write
Context
interface:Serial (DS1 FR L2, USP FR L2)
Example
To select the q933a LMI type:
G450-001(if:Serial 3/1:1)# frame-relay lmi-type q933a
Parameter
Description
Possible Values
Default
Value
lmi_type
The type of local
management
interface
ansi
- LMI according to ANSI T1.617 [9]
q933a
- LMI according to ITU-T Q.933 [7]
autosense
lmi-rev1
disable
Summary of Contents for G450 Manager
