ICMP keepalive
Issue 1 January 2008
461
Example
To set the source IP address of the keepalive packets to 149.49.78.96:
G450-001(if:FastEthernet 10/2)# keepalive-icmp source-address 149.49.78.96
Related Commands
keepalive-icmp failure-retries
keepalive-icmp success-retries
Use the
keepalive-icmp success-retries
command to set the number of consecutive
successful keepalive packets necessary to set the interface’s keepalive status as Up. Using this
command without a parameter resets the success-retry value to the default value.
Syntax
keepalive-icmp success-retries
success-retries-number
Parameters
User Level
read-write
Context
interface:FastEthernet
Example
To set the number of consecutive successful keepalive packets necessary to set the interface’s
keepalive status as up to 2:
G450-001(if:FastEthernet 10/2)# keepalive-icmp success-retries 2
Related Commands
keepalive-icmp failure-retries
,
Parameter
Description
Possible
Values
Default
Value
success-
retries-
number
The number of successful keepalive packets
required
1-32
1
Summary of Contents for G450 Manager
