OSPF
Issue 1 January 2008
617
ip ospf authentication-key
Use the
ip ospf authentication-key
command to configure the interface authentication
password. Use the
no
form of this command to remove the OSPF password.
Syntax
ip ospf authentication-key
key
no ip ospf authentication-key
Parameters
User Level
read-write
Context
interface:Serial (DS1 PPP L2-L3, DS1 PPP L3, DS1 FR-SUB L2-L3, DS1 FR-SUB L3,
USP PPP L2-L3, USP PPP L3), FastEthernet (L2-L3, L3, PPP L2-L3, PPP L3), VLAN (L2-L3,
L3), Loopback (L2-L3, L3), Tunnel (L2-L3, L3), Dialer (L2-L3, L3)
Example
To set the authentication password for the VLAN 1 interface as my_pass:
G450-001(if:Vlan 1)# ip ospf authentication-key my_pass
Related Commands
,
ip ospf network point-to-multipoint
Parameter
Description
Possible
Values
Default
Value
key
The interface authentication password
string
(1-8 chars)
Summary of Contents for G450 Manager
