CLI Commands
OSPF
618 Avaya G450 CLI Reference
ip ospf cost
Use the
ip ospf cost
command to statically configure the interface cost metric. Use the
no
form of this command to return to dynamic calculation of the cost.
Syntax
ip ospf cost
cost
no ip ospf cost
Parameters
User Level
read-write
Context
interface:Serial (DS1 PPP L2-L3, DS1 PPP L3, DS1 FR-SUB L2-L3, DS1 FR-SUB L3,
USP PPP L2-L3, USP PPP L3), FastEthernet (L2-L3, L3, PPP L2-L3, PPP L3), VLAN (L2-L3,
L3), Loopback (L2-L3, L3), Tunnel (L2-L3, L3), Dialer (L2-L3, L3)
Example
To set the cost metric for the VLAN 1 interface to 10:
G450-001(if:Vlan 1)# ip ospf cost 10
Related Commands
ip ospf network point-to-multipoint
,
,
Parameter
Description
Possible
Values
Default
Value
cost
The price assigned to each interface for the
purpose of determining the shortest path
1-65535
1
Summary of Contents for G450 Manager
