Policy - QoS lists
Issue 1 January 2008
749
To specify that rule 22 applies to all packets
except
for those whose destination port is 300:
G450-001(ACL 330/ip rule 22)# not udp destination-port eq 300
Related Commands - Policy-based routing
dscp (policy-based routing, packet sniffing, VPN)
Related Commands - Policy
,
,
,
Related Commands - VPN
dscp (policy-based routing, packet sniffing, VPN)
,
,
,
udp source-port
Use the
udp source-port
command to define a source port with the UDP protocol for which
to apply the current rule.
Use the
no
form of the command to set the UDP source port to
any
. If the protocol is not UDP,
the protocol is set to UDP and the destination port is set to its default value.
Use the
not
form of the command to specify that the rule applies to all UDP ports other than the
requested ports. If the protocol is not UDP, the protocol is set to UDP and the destination port is
set to its default value.
Note:
Note:
Issuing this command also sets the protocol to be UDP, if it is not already.
Syntax
udp source-port any | {{eq | lt | gt} {
port_name
|
port_number
}}
| {range
start_port end_port}
no udp source-port
Summary of Contents for G450 Manager
