Policy-based routing
Issue 1 January 2008
769
Related Commands - Packet sniffing
,
,
(policy, policy-based routing, packet sniffing)
,
,
Related Commands - Policy
,
icmp
Use the
icmp
command to specify that the current rule applies to a specific type of ICMP
packet.
Use the
not
form of this command to specify that the rule applies to all packets
except
those of
the requested ICMP attribute. If the IP protocol is not ICMP, it is set to ICMP.
Use the
no
form of the command to specify that the current rule applies to any type of ICMP
packet.
Note:
Note:
The
icmp
command also sets the IP protocol to ICMP.
Syntax
[not] icmp {
name
| {
icmp_type
icmp_code
}}
no icmp
Parameters
User Level
read-write
Parameter
Description
Possible Values
Default
Value
name
Specify that the rule
applies to this ICMP name
icmp_type
Specify that the rule
applies to this icmp type
For an ip-rule:
0-256
For a QoS rule:
0-65535
icmp_code
Specify that the rule
applies to this icmp code
For an ip-rule:
0-256
For a QoS rule:
0-65535
Summary of Contents for G450 Manager
