CLI Commands
QoS
838 Avaya G450 CLI Reference
Related Commands
,
,
QoS
set qos bearer
Use the
set qos bearer
command to permit the setting of VoIP QoS-bearer related
parameters for the Media Gateway Processor and VoIP engines. Since Media Gateway
Controller and VoIP engines share the same setup, local values are not set to entered values
unless
set qos control local
has been executed (refer to
Syntax
set qos bearer {bbedscp | efdscp | 802p | rtpmin | rtpmax}
value
Parameters
Parameter
Description
Possible
Values
Default
Value
bbedscp
Keyword specifying that the following value is the
BBE differentiated services code point
0-63
43
efdscp
Keyword specifying that the following value is the
EF differentiated services code point
0-63
46
802p
Keyword specifying that the following value is the
802 priority value
0-7
6
rtpmin
Keyword specifying that the following value is the
RTP port min value. The rtpmin value must be an
even number, and the difference between rtpmin
and rtpmax must be at least 129.
2048-65406
2048
rtpmax
Keyword specifying that the following value is the
RTP port max value. The rtpmax value must be an
odd number and the difference between rtpmax and
rtpmin must be at least 129.
2177-65535
65535
value
A value for the specified keyword
Summary of Contents for G450 Manager
