QoS
Issue 1 January 2008
839
User Level
read-write
Context
general
Example
To set the BBE differentiated services code point to 43:
G450-001(super)# set qos bearer bbedscp 43
Related Commands
set qos control
Use the
set qos control
command to define the source for QoS control parameters. The
source can be either
local
where the user configures the values via the CLI, or
remote
in which
case the values are obtained from the media gateway controller. The default value is
remote
.
Syntax
set qos control {local | remote}
Parameters
User Level
read-write
Context
general
Parameter
Description
Possible
Values
Default
Value
local
Keyword that specifies to configure QoS
values via the CLI
remote
Keyword that specifies to obtain QoS values
from the media gateway controller
Summary of Contents for G450 Manager
