RMON monitoring
Issue 1 January 2008
873
rmon event
Use the
rmon event
command to create an RMON event entry. The RMON event can then
be triggered as part of an RMON alarm. To create an RMON alarm, refer to
no
form of this command to delete a specific RMON event entity.
Syntax
rmon event
event_num event_type
description
description
owner
owner
no rmon event
event_num
Parameters
User Level
read-write
Context
general
Example
To create an RMON event entry with a resetTrap trap event number 32 for owner config:
G450-001(super)# rmon event 32 trap description resetTrap owner config
event 32 was created successfully
Related Commands
Parameter
Description
Possible Values
Default
Value
event_num
The index number of the event
event_type
The type of event
log, trap
,
logAndTrap
,
none
description
The event description
owner
The username of the event owner
Summary of Contents for G450 Manager
