CLI Commands
RTP statistics
902 Avaya G450 CLI Reference
rtp-stat event-threshold
Use the
rtp-stat event-threshold
command to set thresholds on the QoS event
counters incremented by the RTP statistics application. If one or more event thresholds are
exceeded during an RTP stream and the RTP statistics application is configured to generate
QoS SNMP traps, a trap is generated upon termination of the RTP stream. Use the
command to configure the RTP statistics application to automatically generate QoS
traps. Use the
command to configure the QoS metric thresholds. Event
thresholds should be configured such that the sending of a trap corresponds to a customer’s
actual experience of QoS problems during the stream.
Syntax
rtp-stat event-threshold
{all|codec-loss|codec-rtt|echo-return-loss|loss|remote-loss|rtt|
jitter|remote-jitter|ssrc-change}
num
no rtp-stat event-threshold
{all|codec-loss|codec-rtt|echo-return-loss|loss|remote-loss|rtt|
jitter|remote-jitter|ssrc-change}
Parameters
Parameter
Description
Possible
Values
Default
Value
all
Keyword specifying to set all event
thresholds to the specified number
codec-loss
Keyword specifying to set the event
threshold for the codec-loss metric
codec-rtt
Keyword specifying to set the event
threshold for the codec-rtt metric
echo-return-loss
Keyword specifying to set the event
threshold for the echo-return-loss
metric
loss
Keyword specifying to set the event
threshold for the loss metric
remote-loss
Keyword specifying to set the event
threshold for the remote-loss metric
Summary of Contents for G450 Manager
