CLI Commands
SAT
920 Avaya G450 CLI Reference
Output fields:
Related Commands
,
,
,
SAT
sat
Use the
sat
command to provide a shortcut method to access the System Access Terminal
(SAT) so that Avaya Communication Manager translation work can be performed. See the
description for
on page 562 for more information. The server must configure the SAT
port to 5023.
Syntax
sat
Field
Description
Session ID
The RTP statistics index for the RTP session
From
The IP address of the G450
To
The IP address of the session destination (in this case, a
destination within the specified subnet)
At
The time the traceroute is performed
TTL
The hop count and TTL field value of probe packets
HOP ADDRESS
The hop IP address
DELAY
The round trip time per probe packet. Three probe
packets are sent per hop address, and the displayed
value is the average of the three round-trip times. An
asterisk (*) indicates that the probe packets timed out.
Summary of Contents for G450 Manager
