SLS survivability
Issue 1 January 2008
933
Example
To set the interface to agree with A-law companding for DS1:
G450-001 (sls-ds1-<port address>)# set interface-companding alaw
to set the interface to agree with A-law companding for BRI:
G450-001 (sls-bri-<port address>)# set interface-companding alaw
Related DS1 commands
,
,
Related BRI commands
,
,
,
,
,
set layer1-stable
Use the
set layer1-stable
command to determine whether or not to keep the physical
layer active (stable) between calls in SLS. Some European countries, France, for example,
require that the physical layer is deactivated when there is no active call.
Note:
Note:
This command is valid only for a BRI circuit employed with ISDN.
Syntax
set layer1-stable {yes | no}
Parameters
Parameter
Description
Possible
Values
Default
Value
yes
Keyword specifying to keep the
physical layer active between calls.
This is the default.
no
Keyword specifying not to keep the
physical layer active between calls
Summary of Contents for G450 Manager
