SLS survivability
Issue 1 January 2008
939
set tei-assignment
Use the
set tei-assignment
command to select the method by which the Layer 2 (LAPD)
protocol obtains its Terminal Endpoint Identification (TEI) address in SLS.
Note:
Note:
This command is valid only for a BRI circuit employed with ISDN.
Syntax
set tei-assignment
tei
Parameters
User Level
read-write
Context
>
Example
To set the method by which the LAPD protocol obtains its TEI address as automatic:
G450-001(sls-bri <port address>)# set tei-assignment auto
Related Commands
,
,
Parameter
Description
Possible
Values
Default
Value
tei
The method by which the Layer 2 (LAPD) protocol
obtains its Terminal Endpoint Identification (TEI)
address in SLS.
●
auto
– TEI is assigned by the network
provider
●
zero
– TEI is fixed
auto
zero
auto
Summary of Contents for G450 Manager
